COEM Cast-in plates are used to tie/ fix concrete panels to each other. They are used in panels, slabs and civil concrete products. Also to fix uprights and roofing beams to the concrete panels/slabs. In certain projects (where applicable) cast-in plate are used in conjunction with panel clips and frames (I beams). This can eliminate the majority of panel braces required. This saves rigging time and brace hire.
The majority of cast-in plates are sourced from local steel fabricators. Generally these are not ordered early enough. As a result extensive delays are common. COEM manufacture and stock the most common cast-in plates. This ensures rapid order fulfillment. COEM cast-in plates are mass produced. Hence tighter quality control, adherence to industry standards and are more economical.
| Length | Width | Plate | Height | Type | Studs | Black | HDG |
|---|---|---|---|---|---|---|---|
| 200 mm | 200 mm | 12 mm | 85 mm | Type 2 | 2 x 2 | ||
| 200 mm | 200 mm | 12 mm | 85 mm | Type | 2 x 2 | ||
| 200 mm | 200 mm | 12 mm | 120 mm | Type 2 | 2 x 2 | ||
| 200 mm | 200 mm | 12 mm | 120 mm | Type 1 | 2 x 2 | ||
| 300 mm | 200 mm | 16 mm | 120 mm | Type 2 | 3 x 2 | ||
| 400 mm | 200 mm | 16 mm | 120 mm | Type 2 | 4 x 2 | ||
| 500 mm | 200 mm | 16 mm | 120 mm | Type 2 | 5 x 2 |
COEM Cast-in plate accessories are available. Product such as COEM recess formers, COEM Cast-in plate stands/ spacers etc speed up and reduce the opportunity of tardy installation, which can cause additional costs.
COEM Recess formers are manufactured from HDPE. These saves the subcontractor from fashioning expensive time consuming timber inserts with an extremely limited life. The accuracy of the cover is ensured, plus unlike the timber inserts are easily removed. Concrete will not stick to HDPE. COEM Cast-in plate stands/spacers quickens installation and positions the plate at the optimum level and height.
Recess formers
